Table of Contents
Advertisement
section 6: maintenance
always disconnect power
to the machine before
performing maintenance.
failure to do this may
result in serious person-
al injury.
schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
daily check:
•
loose mounting bolts.
•
Worn or damaged saw blades.
•
Worn or damaged switches or wires.
•
any other unsafe condition.
Weekly maintenance:
•
Clean sliding table surface and grooves.
•
Clean the cast iron saw table.
•
Clean the sliding table roller guideways.
•
Clean the rip fence and sliding grooves.
•
Clean the rip fence bracket.
monthly check:
•
Clean/vacuum dust buildup from inside cabi-
net and off motor.
•
v-belt tension, damage, or wear.
note: To ensure optimum power transmission
from the motor to the blades, the V-belts must be
in good condition (free from cracks, fraying and
wear) and operate under proper tension.
g0493 14" sliding table saw
cleaning
Cleaning the Model g0493 is relatively easy.
vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. use
compressed air to blow dust from between the
two sections of the sliding table. if any resin has
built up, use a resin dissolving cleaner to remove
it. treat all unpainted cast iron and steel with a
non-staining lubricant after cleaning.
unpainted cast iron
protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces. do not clean
cast iron with water or it will rust!
Keep tables rust-free with regular applications of
products like g96
gun treatment, slipit
®
Boeshield
t-9 (see section 5: accessories
®
on page 44 for more details).
, or
®
-47-
Advertisement
Table of Contents
