Section 7: Maintenance; Schedule; Cleaning - Grizzly G1023RL Series Owner's Manual

SECTION 7: MAINTENANCE

Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.

Schedule

For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
• Loose mounting bolts/arbor nut.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean table surface and miter slot grooves.
• Clean and protect cast-iron table.
• Clean rip fence.
Monthly Maintenance:
• Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belt for proper tension, dam-
age or wear (Page 77).
Every 6–12 Months:
• Lubricate trunnion slides, worm gear, bull
gear, and leadscrew (Page 60).
Model G1023RL Series (Mfd. Since 02/21)

Cleaning

Cleaning the Model G1023RL series table saw is
relatively easy. Vacuum excess wood chips and
sawdust, and wipe off the remaining dust with a
dry cloth. If any resin has built up, use a resin-
dissolving cleaner to remove it.
Protect the unpainted cast-iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on the bare metal
surface. Keep the table rust-free with regular
applications of products like G96
SLIPIT ® , or Boeshield ®
G5562—SLIPIT ® 1 Qt. Gel
®
G5563—SLIPIT 12 Oz. Spray
G2871—Boeshield ® T-9 12 Oz. Spray
G2870—Boeshield ® T-9 4 Oz. Spray
®
H3788—G96 Gun Treatment 12 Oz. Spray
H3789—G96 ® Gun Treatment 4.5 Oz. Spray
Figure 99. Recommended products for protect-
ing unpainted cast iron/steel parts on machinery.
® Gun Treatment,
T-9.
-59-