Understanding Ipv6 - Cisco ME 3400 Software Configuration Manual

Configuring IPv6 Unicast Routing
This chapter describes how to configure IPv6 unicast routing on the Cisco ME 3400 Ethernet Access
switch.
For information about configuring IPv4 unicast routing, see
Routing."
IPv6 ACLs."
To use this feature, the switch must be running the metro IP access image. To enable IPv6 routing, you
must configure the switch to use a dual IPv4 and IPv6 switch database management (SDM) template.
See the
For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS
Note
documentation referenced in the procedures
•
•
•

Understanding IPv6

IPv4 users can move to IPv6 and receive services such as end-to-end security, quality of service (QoS),
and globally unique addresses. The IPv6 address space reduces the need for private addresses and
Network Address Translation (NAT) processing by border routers at network edges.
For information about how Cisco Systems implements IPv6, go to this URL:
http://www.cisco.com/en/US/products/ps6553/products_ios_technology_home.html
For information about IPv6 and other features in this chapter
•
•
OL-9639-07
For information on configuring IPv6 access control lists (ACLs) see
"Dual IPv4 and IPv6 Protocol Stacks" section on page
"Understanding IPv6" section on page 36-1
"Configuring IPv6" section on page 36-8
"Displaying IPv6" section on page 36-22
See the Cisco IOS IPv6 Configuration Guide at this URL:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/12_4t/ipv6_12_4t.html
Use the Search field on Cisco.com to locate Cisco IOS software documentation. For example, if you
want information about static routes, you can enter Implementing Static Routes for IPv6 in the
search field to get see links to multiple documents about static routes
C H A P T E R
Chapter 35, "Configuring IP Unicast
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
36
Chapter 37, "Configuring
36-5.
36-1