Cisco ME 3400 Software Configuration Manual page 859

Chapter 36 Configuring IPv6 Unicast Routing
Table 36-3 Commands for Displaying EIGRP IPv6 Information
Command
show ipv6 eigrp [as-number] interface
show ipv6 eigrp [as-number] neighbor
show ipv6 eigrp [as-number] traffic
show ipv6 eigrp topology [as-number | ipv6-address]
[active | all-links | detail-links | pending | summary |
zero-successors]
Table 36-4 Commands for Displaying IPv4 and IPv6 Address Types
Command
show ip http server history
show ip http server connection
show ip http client connection
show ip http client history
This is an example of the output from the show ipv6 interface privileged EXEC command:
Switch# show ipv6 interface
Vlan1 is up, line protocol is up
IPv6 is enabled, link-local address is FE80::20B:46FF:FE2F:D940
Global unicast address(es):
Joined group address(es):
MTU is 1500 bytes
ICMP error messages limited to one every 100 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds
ND router advertisements live for 1800 seconds
<output truncated>
This is an example of the output from the show ipv6 cef privileged EXEC command:
Switch# show ipv6 cef
::/0
nexthop 3FFE:C000:0:7::777 Vlan7
3FFE:C000:0:1::/64
attached to Vlan1
3FFE:C000:0:1:20B:46FF:FE2F:D940/128
receive
3FFE:C000:0:7::/64
attached to Vlan7
OL-9639-07
Purpose
Display the previous 20 connections to the HTTP server, including the IP
address accessed and the time when the connection was closed.
Display the current connections to the HTTP server, including the local and
remote IP addresses being accessed.
Display the configuration values for HTTP client connections to HTTP
servers.
Display a list of the last 20 requests made by the HTTP client to the server.
3FFE:C000:0:1:20B:46FF:FE2F:D940, subnet is 3FFE:C000:0:1::/64 [EUI]
FF02::1
FF02::2
FF02::1:FF2F:D940
Purpose
Display information about interfaces configured for EIGRP IPv6.
Display the neighbors discovered by EIGRP IPv6.
Display the number of EIGRP IPv6 packets sent and received.
Display EIGRP entries in the IPv6 topology table.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Displaying IPv6
36-23