Using Ftp To Access The Mib Files - Cisco ME 3400 Software Configuration Manual

Appendix A Supported MIBs
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
You can use this URL for a list of supported MIBs for Cisco products:
Note
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
You can access other information about MIBs and Cisco products on the Cisco web site:
ftp://nm-tac.cisco.com/pub/mib_repo/

Using FTP to Access the MIB Files

You can obtain each MIB file by using this procedure:
Make sure that your FTP client is in passive mode.
Step 1
Note
Use FTP to access the server ftp.cisco.com.
Step 2
Log in with the username anonymous.
Step 3
OL-9639-07
INET-ADDRESS-MIB
IPMROUTE-MIB
LLDP MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
PIM-MIB
RFC1213-MIB (Functionality is as per the agent capabilities specified in the
CISCO-RFC1213-CAPABILITY.my.)
RFC1253-MIB (OSPF-MIB)
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
Some FTP clients do not support passive mode.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Using FTP to Access the MIB Files
A-3