Figure 7-55. Protection Provisioning Menu - ADTRAN MX2820 System Manual

4. From the Access Module Menus screen, select the slot number for the MUX module that is
to be provisioned, and press
5. From the Main Menu, select
6. From the Provisioning menu, select
Figure 7-55 shows the Protection Provisioning Menu screen.
Shelf: 1
Unacknowledged Alarms: None
Selection:
7. From the Protection Provisioning menu, select
Input the letter
without performing a manual protection switch, and press
8. From the Protection Provisioning menu, select
This parameter determines the number of seconds that must pass before another module
switch is allowed. The default is 10 seconds.
Input a value from 0 to 3600 to set the Minimum Switch Period (in seconds), and press
.
E
NTER
9. From the Protection Provisioning menu, select
This parameter determines the number of times per hour the module is allowed to switch
between MUX modules. If in an hour, the modules switch more than the Maximum Switch
Threshold allows, the module issues a trap and stops switching modules for the next 24
hours. The default setting is three times per hour.
Input a value from 1 to 24 to set the Maximum Switch Threshold (in hours), and press
.
E
NTER
10. From the Protection Provisioning menu, select
61186003L1-1D
Section 7, User Interface Guide - DLP-738, Provision MUX Module Protection
. The Access Module Main Menu displays.
E
NTER
P
ROVISIONING
Slot: 1A ADTRAN MX2820 System
Protection Provisioning
1 - Perform Manual Switch
2 - Minimum Switching Period (sec.) : 10
3 - Maximum Switch Threshold : 3
4 - Clear Number of Switches = 0

Figure 7-55. Protection Provisioning Menu

to perform manual protection switch, or input the letter
Y
and press
E
NTER
.
P
ROTECTION
TID:
'?' - System Help Screen
P M
ERFORM
M S
INIMUM WITCHING
M S
AXIMUM
C N
LEAR UMBER OF
.
04/26/04 16:54
HTVLALEXD16
.
S
ANUAL WITCH
N
.
E
NTER
.
P
ERIOD
.
T
WITCH HRESHOLD
.
S
WITCHES
to escape
7-153