Provision Clock Module
INTRODUCTION
This procedure provides step-by-step instructions to provision the Clock Module for the STS-1
MUX in the MX2820 system.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before provisioning the Clock Module. The parameters
need to be set to match the desired application.
The applicable prerequisite procedures can be found in "NTP-003,
CLOCK CARD PROVISIONING DATA
Provisioning data includes the following:
• Timing Mode
• Timing Type
• Termination
PROCEDURE
1. If not already connected, connect the VT100 terminal or PC to the craft port. For details,
refer to DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
61186003L1-1D
DLP-743
A
M
CCESS
ODULES
Clock Module
and press
.
E
NTER
Installation".
7-169