Table of Contents
Advertisement
The server settings must match the RADIUS client settings
9. Run the Validate Server Connection option to verify server access.
Failure to validate correct provisioning options and connections
could result in system lockout. Should this occur, contact ADTRAN
Technical Support.
10. Select
for the desired RADIUS Authentication option (Menus, TL1, and/or SNMP)
E
NABLE
from this menu to enable RADIUS authentication.
11. Press
as required to return to the RADIUS Provisioning menu. Configure other servers
E
SC
as required locally.
12. When RADIUS provisioning is complete, press
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
61186003L1-1D
Section 7, User Interface Guide - DLP-745, Provision RADIUS
NOTE
CAUTION
to return to the MX2820 Main Menu.
E
SC
7-179
Advertisement
Chapters
Table of Contents
Troubleshooting
