Procedure - ADTRAN MX2820 System Manual

Adtran mx2820 multiplexer: system manual

Hide thumbs Also See for MX2820:

Table of Contents

MX2820 System Manual

PROCEDURE

Perform the Steps Below in the Order Listed:

1. Install Modules in MX2820 Shelf:

• Unpack, inspect, and install the primary MUX Module.

• Unpack, inspect, and install the protect MUX Module, if required.

• Install front panel blanks in vacant slots.

2. Provision the STS-1 network.

3. Provision the VT/Port (T1/E1) interface.

4. Provision STS-1 MUX protection.

5. Provision STS-1 MUX loopback timeout.

6. Perform acceptance testing for STS-1 MUX Modules.

FOLLOW-UP PROCEDURES

All applicable modules, SCU and the required STS-1 MUX modules, have been installed.

Follow-up procedures should be observed in accordance with CO SOP.

For details, refer to:

61186003L1-1D

Table of Contents