Table 5-33. Sts-1 Pm Near-End Parameter Descriptions; Sts-1 Pm Near-End Parameter Descriptions - ADTRAN MX2820 System Manual

STS-1 PM Near-End Parameter Descriptions

Table 5-33 provides a description of the STS-1 PM near-end parameters that appear on the
screens.

Table 5-33. STS-1 PM Near-End Parameter Descriptions

Parameter Definition
Section
CV-S Code Violation - Sec-
tion
SEFS-S Severely Errored
Framing Seconds-
Section
ES-S Errored Seconds -
Section
SES-S Severely Errored Sec-
onds - Section
Line
CV-L Code Violation - Line
ES-L Errored Second -
Line
SES-L Severely Errored Sec-
onds - Line
UAS-L Unavailable Seconds
- Line
Path
CV-P Coding Violations -
Path
ES-P Errored Seconds -
Path
61186003L1-1D
Section 5, User Interface Guide - UIG-525, STS-1 MUX PM Statistics
Description
This parameter indicates the number of coding violations
encountered at the Section Layer.
This parameter indicates the number of seconds that
contain one or more SEF events - only counted at the
Section Layer.
This parameter indicates the number of seconds with
one or more coding violations or one or more incoming
defects (SEF, LOS) at the Section Layer.
This parameter indicates the number of seconds with x
or more coding violations at the Section Layer, or a sec-
ond during which at least one or more incoming defects
at the Section Layer has occurred (Values of x vary
dependent upon the line rate and the Bit Error Rate).
This parameter indicates the number of coding violations
encountered at the Line Layer.
This parameter indicates the number of seconds with
one or more coding violations or an incoming defect (AIS-
L) at the Line Layer.
This parameter indicates the number of seconds with x
or more coding violations at the Line Layer, or a second
during which at least one or more incoming defects at
the Line Layer has occurred (Values of x vary dependent
upon the line rate and the Bit Error Rate).
This parameter indicates the time in seconds that the
Line Layer has been unavailable for data delivery.
This parameter indicates the number of coding violations
encountered at the Path Layer.
This parameter indicates the number of seconds with
one or more coding violations or one or more incoming
defects (SAIS-P, LOP, UNEQ-P) at the Path Layer.
5-67