Figure 7-12. Mx2820 Cable Assembly Insertion Orientation; Procedure - ADTRAN MX2820 System Manual

MX2820 System Manual
Electronic modules can be damaged by static electrical discharge.
Before handling modules, wear an antistatic discharge wrist strap
to prevent damage to electronic components. Place modules in
antistatic packing material when transporting or storing. When
working on modules, always place them on an approved antistatic
mat that is electrically grounded.

PROCEDURE

1. Connect the FutureBus cables to the MX2820 shelf.
The first row of connectors is for the Transmit side. The second row of connectors is for
the Receive side. The 19-inch shelf has seven redundant pairs of connectors for the cable
interface. The 23-inch shelf has nine redundant pairs of connectors for the cable
interface. Figure 7-12
U T
6 O
)
/ R 1
( T 1

Figure 7-12. MX2820 Cable Assembly Insertion Orientation

2. Route the cables from the MX2820 shelf to the low-speed cross connect or to the
appropriate connection.
3. If necessary, trim the cable to length and crimp on the appropriate connector for the
connection point.
4. Neatly tie down the cable according to company guidelines.
7-62
CAUTION
shows the insertion orientation for the MX2820 cable assembly.
U T
6 O
)
/ R 1
( T 1
Overmolded
Connector
Non-overmolded
Connector
61186003L1-1D