Normal Power-Up Procedure
Correct Passcode
Incorrect Passcode
No Passcode
61200.129L1-1
After the unit has been put into operation with the
initial power-up and initialization, the subsequent
power-up procedure includes only the Power-Up Self
Test followed by the request for a Passcode (password)
if this option was selected during initialization.
Use the number keys to enter the previously recorded
passcode followed by pressing Enter.
When a correct passcode is entered, the message
Access Granted is displayed and the unit grants full
access privileges. Press any key to proceed to the
opening menu.
When an incorrect passcode is entered, the message
Incorrect is displayed. Press any key to return to the
passcode prompt.
When no passcode is entered the message Limited
Access is displayed and the unit grants limited access
to the menu system for viewing only. Pressing any
key proceeds to the Main menu. No changes are
allowed until the correct passcode is entered.
The passcode can also be entered using the Utility
menu option.
TSU 120 User Manual
Chapter 2. Installation
3 7