Kodak HR User Manual page 97

Setting the Trigger Points at the Scanner
plastic cover
May 2002
1. On the left side of the scanner:
a. Move SET/ADJ/RUN to ADJ.
b. Press MODE to increment the number (or press TEACH to decrement the
number) to the value you determined to be the left trigger point.
c. Move SET/ADJ/RUN to RUN.
2. On the right side of the scanner:
a. Move SET/ADJ/RUN to ADJ.
b. Press MODE to increment the number (or press TEACH to decrement the
number) to the value you determined to be the right trigger point.
c. Move SET/ADJ/RUN to RUN.
3. Close the plastic cover.
Using the Long Roll Accessory
TEACH ADJ MODE
SET RUN L D
P192_1565BCA
P192_1565BC
D-33