Kodak HR User Manual page 28

Connecting and Operating the Scanner
carded
negative
magnetic
sheet
2-10
Placing a Negative or Mounted Slide in the Film
Holder
Select the appropriate film holder for the negative or mounted slide you will be
scanning.
Preparing a Carded Negative
IMPORTANT: For best focus, use the film holder that is closest to the size of the
opening in the aperture card.
1. Lift the film holder's magnetic sheet.
IMPORTANT: In the next step, the emulsion side must be toward the rear of the
scanner.
2. With the emulsion side toward the rear of the scanner, locate the carded
negative on the film holder's two pins.
3. Carefully close the magnetic sheet over the carded negative.
P192_0021AC
Continue with Placing the Film Holder in the Scanner on page 2-12.
emulsion
side
pin
film holder
May 2002