Installing or Removing the Long Roll Accessory
2 mounting screws
2 flanges
P192_1538BCA
P192_1538BC
May 2002
IMPORTANT: Because of manufacturing tolerances, aperture plates and Long
Roll Accessories cannot be interchanged.
If your lab has more than one Long Roll Accessory, you may want
to use labels with the same colors or numbers to identify aperture
plates with the associated Long Roll Accessory.
Overview of Parts
The parts shown below are shipped with the Long Roll Accessory. Although not
shown, 5 aperture plates are also shipped with each Long Roll Accessory.
1.5 in. rear
mounting screw
2 guide pins
Using the Long Roll Accessory
aperture plate
long screwdriver
height adjustment
tool
D-5