Kodak HR User Manual page 81

Threading the Film
You can thread the film from either side of the Long Roll Accessory.
idler arm
spindle
P192_1551BCA
P192_1551BC
May 2002
1. Position the film with the data holes down and the emulsion toward the
imager.
emulsion side
2. Install the film on the spindle.
drive roller
3. Thread the film:
a. around the idler arm
b. around the drive roller
c. between the aperture and the clamp, keeping the film in the track (grasp
the film on either side to locate the film in the track)
d. around the drive roller and idler arm
Using the Long Roll Accessory
data holes
clamp
aperture
P192_1550BCA
P192_1550BC
D-17