Programming the Sensors for the Long Roll
Accessory
Power on the scanner.
The display on the left sensor will be inverted.
Programming the Left Sensor
May 2002
1. Open the plastic cover on the left display.
2. Make sure the operation mode selector is set to L.
NOTE: L means that light triggers high numbers. D means that dark triggers
high numbers.
plastic cover
3. Move SET/ADJ/RUN to SET.
4. Press and hold MODE until d123 appears (123 is inverted).
5. Press TEACH.
Using the Long Roll Accessory
TEACH
ADJ
MODE
SET
RUN
L
D
operation mode selector
TEACH
ADJ
MODE
SET
RUN
L
D
P192_1555BCA
P192_1555BC
D-39