Kodak HR User Manual page 85

Visually Checking the Punch Reader Height
P192_1554BCA
P192_1554BC
May 2002
1. Look at the small blue light located in the notch at the top of the punch reader,
which is below the pressure rollers and adjacent to the edge of the aperture.
The blue light should be in line with the punches in the film.
2. Align the light to the data holes by turning the adjusting screw clockwise to
lower the light or counterclockwise to raise the light.
Using the Long Roll Accessory
adjusting screw
punch reader
film reader
D-21