Kodak HR User Manual page 67

Upgrading the Scanner's Firmware
Check the Web site (see page D-2) for the most up-to-date instructions.
May 2002
1. Open SAM and click the Transfer tab on the Operations window.
2. Make sure the File Type is Firmware (W).
3. Click Browse and find the .zip file that you downloaded from KODAK.COM
(example: HR500\Px03_000.zip).
4. Click Open.
5. Make sure the Location on the Scanner is Current.
6. Click To Scanner to start the transfer.
The transfer takes approximately one minute.
Using the Long Roll Accessory
D-3