Using the Long Roll Accessory
pressure roller housing
toward you
tension arm toward
rear of scanner
P192_1545BC
D-8
Attaching the Long Roll Accessory to the Scanner
CAUTION: Make sure the scanner is powered OFF.
1. Grasp the large rectangular opening to lift and remove the Long Roll
Accessory from the shipping box.
tension arm toward
rear of scanner
rectangular
opening
2. Hold the Long Roll Accessory at the ends and carry it to the scanner.
3. Position the Long Roll Accessory so the two pressure roller housings are
toward you and the two tension arms are toward the rear of the scanner.
pressure roller
housing toward you
ends
May 2002