Kodak HR User Manual page 76

Using the Long Roll Accessory
D-12
Installing the Aperture Plate
IMPORTANT: To power on the scanner without error, an aperture plate must be
installed, latched, and locked.
1. Choose the aperture plate corresponding to the film format you will be
scanning.
lettering on left side
2. Position the aperture plate with the lettering (example: 120/220) visible on the
left side.
CAUTION: Installing an aperture plate backwards may result in a
damaged light bar.
3. Make sure the gate actuator is unlatched for film loading.
4. Center the aperture plate on the lamphouse cover.
P192_1547ACA
P192_1547AC
5. Gently lower the aperture plate and, when you feel resistance, push until it is
secured.
P192_1544ACA
P192_1544AC
aperture
plate
May 2002