Selecting Shape (Color/Shape Tab) - Omron NS Programming Manual

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
1 Tile background
N o t e
N o t e
N o t e
♦
If an indirect reference of color is set, set a color code between 0 and FF to the address.
If a value other than 0 to FF is set as the address, the display color will be invalid.
2-8-9

Selecting Shape (Color/Shape Tab)

If a shape can be specified for the selected lamp or button functional object, the shape displayed on
the Color/shape Tab Page can be selected. Click the Select Button to select from a variety of shape
types.
For some shape types, a pair of ON and OFF shapes can be set.
No. Setting
1 Selected
image display
area
2 Shape from
3 Display Type
4 Edit BMP
5 Color Trans-
parent Setting
6 Deselect
shape
Select this option to tile the background. (Selected in default settings.) Deselect
this option to leave the background transparent.
The image or file name of the shape selected in 2, above, will be displayed.
If Parts List is selected and a Select Shape Button is clicked, the Select Shape Dialog
Box will be displayed. If Bitmap is selected and a shape specification button is clicked,
the Select File Dialog Box will be displayed.
If Shape is selected, an image of the selected shape will be displayed. If File name is
selected, the file name of the selected shape will be displayed.
If the displayed BMP or JPEG image is selected and the Edit Button is clicked, the
image editor will start and editing will be enabled.
Click this button to display the Transparent Color Setting Dialog Box and enable
setting transparent colors for bitmaps.
Click this button to cancel the selection of a shape.
2-8 Common Functional Object Functions
Details
1
2
3
4
5
6
Details
2-87