Omron NS Programming Manual page 398

Section 2 NS Series Functions
NS Series Programming Manual
6. Click the OK Button to transfer the project to the NS hardware.
Operations on the NS hardware
1. Insert the Memory Card into the NS hardware.
2. Start the NS hardware, which now has the project created using the procedures described in the
last section.
The NS hardware logs 5 addresses every 2 seconds and periodically saves the logging data to the
Memory Card.
To read the saved data from the Memory Card, click the Read File Icon on the Object while logging is
stopped to display the list of data file names, in descending order, in a pop-up menu. Select the desired
file from the pop-up menu.
To display a graph that is currently being logged, click the Read File Icon on the Object and select
Show the current logging graph, in the first line of the pop-up menu.
N o t e
N o t e
N o t e
♦
Memory Cards can be rewritten up to 100,000 times. If you were to repeatedly rewrite the Card in
10-minute intervals, 100,000 rewriting cycles would be completed within 2 years.
4 De-select Log clear and Save to File.
5 Select Show the read data only.
2-351
2-15 Data Logs