Omron NS Programming Manual page 427

Section 2 NS Series Functions
NS Series Programming Manual
Procedures for Data Blocks
There are two methods that can be used to transfer, display, and edit recipe data: manipulate the data
in the data block or combine functional objects, such as command buttons and Numeral Display & In-
put objects.
Manipulating Data Block Data
Use the following procedure to transfer, display, and edit recipe data by manipulating the data in the
data block.
Project created on CX-Designer.
1. Data block set.
Transferred to PT
Operations on PT
Data Block Table
No. Item
Data Block
1
Setting
Data Block
2
Table
3 Data File
2. Data block table created.
Memory Card
Values set in PLC.
Contents
Sets the data format and address for the field, and the
number of records.
Shows the data block, and sets the selected data
for each address.
Shows the data in the data block.
Save the data file
on a Memory Card.
2-380
2-17 Data Blocks
CSV file
3. Data file created.
"Product A", "A-000",100,20,200
"Product B", "B-000",90,22,180
"Product C", "C-000",110,50,300
"Product D", "D-000",80,15,200
"Product A1", "A-000",98,18,190
"Product B1", "B-000",95,25,175
"Product C1", "C-000",120,45,350
See
Setting Data Blocks
Data Block Table
Creating Data Files