Omron NS Programming Manual page 91

Section 2 NS Series Functions
NS Series Programming Manual
Bit
2 Not used
1 Not used
0 Not used
The window control area allocations are shown in the following table.
NS Series pop-up screens do not distinguish between global windows and local windows like the NT
Series. The screens are differentiated as pop-up screen 1 (k to k+2), pop-up screen 2 (k+3 to k+5), and
pop-up screen 3 (k+6 to k+8).
Word
k Global Window Screen No.
(See note.)
k +1 Global Window X Coordinate
(See note.)
k +2 Global Window Y Coordinate
(See note.)
k +3 Local Window 1 Screen No.
(See note.)
k +4 Local Window 1 X Coordinate
(See note.)
k +5 Local Window 1 Y Coordinate
(See note.)
k +6 Local Window 2 Screen No.
(See note.)
k +7 Local Window 2 X Coordinate
(See note.)
k +8 Local Window 2 Y Coordinate
(See note.)
Note: Only numeric values in BCD format can be stored.
NT31/631 Series
The PT status control area allocations are shown in the following table.
Word
n Screen Number (control and noti-
fication) (See note.)
n+1 Not used
n+2 Not used
n+3 PT control bit
n+4 Not used
Note: Only numeric values in BCD format can be stored.
PT Status Control Bit
Bit
15 Not used
14 Not used
13 Continuous Buzzer (See note 2.)
12 Short Intermittent (See note 2.)
11 Not used
10 Not used
9 Long Intermittent (See note 2.)
8 Backlight Mode (ON: Lit, OFF:
Flashing) (See note 1.)
7 Print Screen (See note 2.)
Function
−
−
−
Function
$SW1 (Current Pop-up Screen 1 Number)
$SW2 (Position of Pop-up Screen 1
(X Coordinate))
$SW3 (Position of Pop-up Screen 1
(Y Coordinate))
$SW4 (Current Pop-up Screen 2 Number)
$SW5 (Position of Pop-up Screen 2
(X Coordinate))
$SW6 (Position of Pop-up Screen 2
(Y Coordinate))
$SW7 (Current Pop-up Screen 3 Number)
$SW8 (Position of Pop-up Screen 3 (X Co-
ordinate))
$SW9 (Position of Pop-up Screen 3 (Y Co-
ordinate))
Function
Function
2-44
Corresponding system memory
Corresponding system memory
Corresponding system memory
$SW0 (currently displayed screen num-
ber)
−
−
See the following table.
−
Corresponding system memory
−
−
$SB12 (Continuous Buzzer)
$SB13 (Short Intermittent)
−
−
$SB14 (Long Intermittent)
$SB10 (Backlight Flash Control)
$SB25 (Start Printing/Capture Screen)
2-4 System Memory