Selecting The Host Communication Method (Nt20S-St121-Ev3 Only) - Omron NT20S Operation Manual

Setting the Conditions of Communications with the PC/Host by Using the Memory Switches
3-5-1 Selecting the Host Communication Method (NT20S-ST121-EV3
only)
Reference: The communication method must be selected according to the method that the
78
The NT20S-ST121-EV3 can be connected to a PC by the host link or the NT link.
Either link can be selected by setting the "Comm. Type" memory switch. The facto-
ry setting has been made to the "Host link".
Select the host communication method by the menu operation from the System
Menu as mentioned below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
PT Setting
I/O Check
Init. Memory
Memory Switch
MEMORY SW MENU
Comm. Type
Key Sound
Buzzer Sound
Bk light Off
Tool Mode
To set and quit the menu, press the [WRT&EXIT] touch switch. To quit without set-
ting, press [Quit].
connecting PC supports.
DIP-SW Status
(1/2)
Quit
Host Link
Page
OFF
OFF
None
WRT&
EXIT
NT20M
Section 3-5
Select "Maintenance Mode".
Select "Memory Switch".
Repeatedly pressing
"Comm. Type" touch switch
causes the setting to cycle
through the options "Host link",
"NT link", and "NT Link 1:N", in
that order.
the