Omron NS Programming Manual page 110

Section 2 NS Series Functions
NS Series Programming Manual
No. Setting
5 Chamfer
N o t e
N o t e
N o t e
♦
Only shade settings can be made for polygons and sectors.
Set a bevel.
Type
Select one of the following three bevel choices.
None: No bevel
Radius of curve: Rounds the corners using the bevel size setting for the radius.
Cut: Cuts off an isosceles triangle from each corner based on the bevel size setting.
Size
Specify the bevel size.
2-63
Details
2-6 Fixed Objects