Omron NS Programming Manual page 522

Section 2 NS Series Functions 2-20 Special Functions
NS Series Programming Manual
Bit Monitor Display
The Bit Monitor allows displaying the communications addresses, values, bit numbers, bit status
(ON/OFF status), and comments. Up to 22 characters for the NS15 and 12 for the NS10, NS8, and
NS5 can be displayed on the comments display area beside each bit.
NS12 PTs
NS5 PTs
Press the Left (<) or Right (>) Button in the center of the screen with Bit Monitor selected
to switch pages on NS5 PTs. Press the Up ( ) or Down ( ) Button on the lower left of
the screen to switch the bits displayed in the bit status in increments of 4 bits from the
specified address. Press the Setting Screen Button to switch to the Setting Screen in the
Switch Box Utility to enable making settings for displaying a new NS Switch Box File.
2-475