Omron NS Programming Manual page 232

Section 2 NS Series Functions
NS Series Programming Manual
N o t e
N o t e
N o t e
♦ If the number of characters or the address is set too high, the maximum address for the specified
area may be exceeded, e.g., when the number of words is 256 and the write address is $W32767.
If the maximum address in an area is exceeded, a communications error will occur when the
screen to which the string display and input object is set is opened on the NS. Make sure the maxi-
mum address is not exceeded.
♦
If ASCII characters are set in string displays, the following character codes will be used by the NS
depending on the system language that has been set.
System language
Japanese
Chinese
(traditional or simplified)
Other
Switch Screen
Switches to the specified screen when the button is pressed. Press the Switch Screen Button and se-
lect Switch Screen from the list that is displayed.
Character display
Shift-JIS code
GB2312 code Nothing is displayed be-
cause there are no corre-
sponding characters.
Latin 1 code
2-185
2-11 Multifunction Objects
Example
(character code B5)
µ
1
2