Omron JX User Manual page 65
200 v class three-phase input 0.2 to 7.5 kw; 200 v class single-phase input 0.2 to 2.2 kw; 400 v class three-phase input 0.4 to 7.5 kw
Hide thumbs
Also See for JX:
- System configuration manual (12 pages) ,
- System configuration manual (11 pages)
Table of Contents
Advertisement
("A021" is displayed.)
a021
Press
5. Change the 1st digit of the function code.
a021
Press
or
(2 times) (8 times)
("A029" is displayed.)
a029
Press
("9" is entered.)
6. The function code selection is complete.
a029
"A029" selection completed.
(Supplemental Information)
•If you enter a parameter number that is not included in the parameter list, the display
returns to the parameter previously displayed.
•Press the Enter key to shift the digit to the right, and the Mode key to shift to the left.
3-4 Operation Procedure (Example: Factory Default)
•"2" of the 2nd digit blinks.
•"1" of the 1st digit blinks.
•Press the Mode key to start "2" of the 2nd digit
blinking again.
•"9" of the 1st digit blinks.
•Press the Mode key to change the data for A029.
3
3-15
Hide quick links:
Advertisement
Table of Contents
