Operating the Network
3-4-2
Monitoring the SmartSlice I/O System
SmartSlice I/O Status
I/O Unit Error History
54
Individual SmartSlice I/O Units can also be monitored through the PROFIBUS
connection. This data can be retrieved through the I/O Module Tab and the
I/O Error History Tab of the Diagnosis window.
When selecting the I/O Module Tab, the window as shown below will show up.
In case an on-line connection to the GRT1-PRT is open, the View button will
be enabled. Selecting a SmartSlice I/O Unit and pressing the View button will
open a status window for the selected SmartSlice I/O Unit. This information is
described in detail in the SmartSlice GRT1 Series Slice I/O Units Operation
Manual (W455).
The I/O Unit Error History can be monitored, when selecting the I/O Unit Error
History Tab. This window has also been described in section 3-2-5 I/O Com-
munication Error History Monitor.
Section 3-4