Installing The Sfp Transceiver - Planet Networking & Communication IGS-6325 Series User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Industrial Managed Switch as
Follow all the SFP installation steps as shown in the example.

Approved PLANET SFP/SFP+ Transceivers
PLANET Industrial Managed Switch supports both single mode and multi-mode SFP transceivers. The following list of
approved PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model Speed (Mbps) Connector Interface
MFB-FX 100
MFB-F20 100
MFB-F40 100
MFB-F60 100
MFB-TFX 100
MFB-TF20 100
Figure 2-15 appears.
Figure 2-15: Plug in the SFP/SFP+ Transceiver
Fiber Mode
LC Multi Mode
LC Single Mode
LC Single Mode
LC Single Mode
LC Multi Mode
LC Single Mode
38
User's Manual of IGS-6325 Series
Distance Wavelength (nm)
2km 1310nm
20km 1310nm
40km 1310nm
60km 1310nm
2km 1310nm
20km 1310nm
Operating Temp.
0 ~ 60 degrees C
0 ~ 60 degrees C
0 ~ 60 degrees C
0 ~ 60 degrees C
-40 ~ 75 degrees C
-40 ~ 75 degrees C