Table of Contents
Advertisement
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
4.3.3.10 Protocol-based VLAN
This page allows you to add new protocols to Group Name (unique for each Group) mapping entries as well as allow you to see
and delete already mapped entries for the switch. The Protocol-based VLAN screen in
The page includes the following fields:
Object
Delete
Frame Type
The IP subnet to VLAN ID mapping entry is enabled when you click on "Apply".
The delete button can be used to undo the addition of new mappings. The
maximum possible IP subnet to VLAN ID mappings are limited to 128
Figure 4-3-3-18: Protocol to Group Mapping Table Page Screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Frame Type can have one of the following values:
1.
Ethernet
2.
LLC
3.
SNAP
Note: On changing the Frame type field, valid value of the following text field will
vary depending on the new frame type you selected.
User's Manual of IGS-6325 series
Figure 4-3-3-18
159
appears.
Advertisement
Table of Contents
