4.3.3.7 VLAN setting example:
Separate VLAN
802.1Q VLAN Trunk
Port Isolate
4.3.3.7.1 Two Separate 802.1Q VLANs
The diagram shows how the Industrial Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group
2 and VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from
the same VLAN members. The screen in
Industrial Managed Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario is described as follows:
Untagged packet entering VLAN 2
Figure 4-3-3-7
appears and
Figure 4-3-3-7: Two Separate VLANs Diagram
VID
Untagged Members
1
Port-7 ~ Port-52
2
Port-1,Port-2
3
Port-4,Port-5
Table 4-1: VLAN and Port Configuration
151
User's Manual of IGS-6325 series
Table 4-3-3-8
describes the port configuration of the
Tagged Members
N/A
Port-3
Port-6