10.5 Positioning Table Settings (Configurator PMX)
2.
Make necessary parameter settings according to the application and press the [[OK]]
button.
The settings will be stored as part of positioning parameter data.
10.5.3 Creating Positioning Data Table
● The positioning data tables are divided into sheets for each axis, and 20 tables ranging no. 1
to no. 20 can be set.
■
For independent axis control
Parameter
Default (Unit)
name
Operation
E: End point
pattern
Control
I: Increment
method
10-24
Content
Select one from the following operation patterns.
E: End point, C: Continuance point, P: Pass point, J: Speed point
Select either I: Increment or A: Absolute.
WUME-FP7MXY-06