YPP6830 Explosion-Proof Pulse Input Rate/Totalizer
Instruction Manual
Resetting the Total (RESET TOTAL?)
If manual Total Reset is enabled in the Advanced
menu, the total may be reset by pressing the Reset
button and using the Enter button to confirm the
reset.
Additionally if programmed for manual reset, the total
may be reset using a normally open pushbutton
connected across the terminals RST and COM.
Note: The total is cleared immediately when Enter button is
pressed. Totalization will then continue, even if the Enter
button or external reset button continues to be held
down/triggered.
Resetting the Grand Total
(RESET GrTOT?)
If manual Grand Total Reset is enabled in the
Advanced menu, the grand total may be reset using
the Reset button.
To reset the grand total, display the grand total by
pressing the Up/Display button. While grand total is
being displayed, press the Reset button. Confirm the
reset with the Enter button.
Resetting Max/Min Readings
(RESET MAXIMUM, MINIMUM)
The maximum and minimum readings may be reset
by pressing the Reset button while displaying either
the maximum or minimum. The display will show
RESET to verify the reset of maximum or minimum
value.
The maximum and minimum must be reset
individually.
48