YPP6830 Explosion-Proof Pulse Input Rate/Totalizer
Battery Activation Pull Tab
YPP6830 models with battery or battery backup
power will include a battery activation pull-tab. This
tab assures the meter is not operational during
shipment or storage and is located with the battery.
Remove this tab during installation of the meter.
Mounting
The YPP6830 has two slotted mounting flanges that
may be used for pipe mounting or wall mounting.
Alternatively, the unit may be supported by the
conduit using the conduit holes provided.
Refer to Figure 1 and Figure 2.
•
Do not attempt to loosen or remove flange bolts
while the meter is in service.
Dimensions
All units: inches [mm]
Figure 1. Enclosure Dimensions – Front View
3.35 (85.0)
4.15 (105.5)
3.22 (81.9)
Figure 2. Enclosure Dimensions –
Side Cross Section View
12
Instruction Manual
4.86
(123.5)