Setting Numeric Values; Setting Alphanumeric Labels (Label); Main Menu - YOKOGAWA YPP6830-AP0-0 Instruction Manual

YPP6830 Explosion-Proof Pulse Input Rate/Totalizer

Setting Numeric Values

The numeric values are set using the Right and Up
arrow buttons. Press Right arrow to select next digit
and Up arrow to increment digit.
The digit being changed blinks.
Press the Enter button, at any time, to accept a
setting or Menu button to exit without saving changes.
The decimal point is set using the Right or Up arrow
button in the Setup, Decimal Point menu.
Setting Alphanumeric Labels
(LABEL)
Fully alphanumeric values are set using the Right
button to select the digit, the Up and Right arrow
buttons to select the digit reading, and the Enter button
to confirm and select the next digit.
Menus using this entering method will display LABEL in
the upper display. After selecting the digit, and using
the Up and Right arrows to modify the digit, the display
will read CHAR. Using Enter to confirm the new digit will
return the display to reading LABEL.
The digit being changed blinks.
Press the Menu button to exit without saving changes.

Main Menu

The main menu separates the most commonly used
functions in the Setup menu, and more complex
features in the Advanced Features menu.
Press Menu button to enter Programming Mode then
press the Up arrow button to scroll through the main
menu.
•
Press Menu, at any time, to return to the
previous menu selection. Press and hold the
Menu button for 1.5 seconds at any time to return
to Run Mode.
•
Changes to the settings are saved to memory
only after pressing Enter.
•
The display moves to the next menu every time a
setting is accepted by pressing Enter.
19
Instruction Manual