YOKOGAWA YPP6830-AP0-0 Instruction Manual page 25

YPP6830 Explosion-Proof Pulse Input Rate/Totalizer
Total Units (tot U)
This menu is used to select the display units for the
total. The base unit and a multiplier prefix are
selected. If total and units are selected to display, the
multiplier prefix will appear before the total unit
(example: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or 1
million units. The meter will calculate the total
appropriately for display with the programmed
multiplier and units.
A custom unit may be selected (CUST), and no
multiplier menu will be required. In this case, use the
total conversion factor as defined in Custom Units
Total Conversion Factor (totCF) on page 26.
Press the Enter button, at any time, to accept a
setting or Menu button to exit without saving changes.
Grand Total Units (GtotU)
This menu is used to select the display units for the
grand total. The base unit and a multiplier prefix are
selected. If grand total and units are selected to
display, the multiplier prefix will appear before the
total unit (example: MGAL, kL).
Multipliers will convert the total for 1, 100, 1000, or
1 million units. The meter will calculate the total
appropriately for display with the programmed
multiplier and units.
A custom unit may be selected (CUST), and no multiplier
menu will be required. In this case, use the grand total
conversion factor as defined in Custom Units Grand
Total Conversion Factor (GrtCF) on page 26.
Press the Enter button, at any time, to accept a
setting or Menu button to exit without saving changes.
25
Instruction Manual