Lan Static Dhcp - ZyXEL Communications EX3510-B1 User Manual

Table 31 Network Setting > Home Networking > LAN Setup (continued)
LABEL
IPv6 Start
Address
IPv6 End
Address
IPv6 Domain
Name
IPv6 DNS Values
IPv6 DNS Server
1-3
DNS Query
Scenario
Cancel
Apply

8.3 LAN Static DHCP

This table allows you to assign IP addresses on the LAN to individual computers based on their MAC
addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned
at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your Zyxel Device's static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 72 Network Setting > Home Networking > Static DHCP
Chapter 8 Home Networking
DESCRIPTION
Enter the first of the contiguous addresses in the IPv6 address pool.
Enter the last of the contiguous addresses in the IPv6 address pool.
Enter the domain name that is assigned to the DHCPv6 clients.
Select From ISP if your ISP dynamically assigns IPv6 DNS server information.
Select User-Defined if you have the IPv6 address of a DNS server. Enter the DNS server IPv6
addresses the Zyxel Device passes to the DHCP clients.
Select None if you do not want to configure IPv6 DNS servers.
Select how the Zyxel Device handles clients' DNS information requests.
• IPv4/IPv6 DNS Server: The Zyxel Device forwards the requests to both the IPv4 and IPv6 DNS
servers and sends clients the first DNS information it receives.
• IPv6 DNS Server Only: The Zyxel Device forwards the requests to the IPv6 DNS server and
sends clients the DNS information it receives.
• IPv4 DNS Server Only: The Zyxel Device forwards the requests to the IPv4 DNS server and
sends clients the DNS information it receives.
• IPv6 DNS Server First: The Zyxel Device forwards the requests to the IPv6 DNS server first and
then the IPv4 DNS server. Then it sends clients the first DNS information it receives.
• IPv4 DNS Server First: The Zyxel Device forwards the requests to the IPv4 DNS server first and
then the IPv6 DNS server. Then it sends clients the first DNS information it receives.
Click Cancel to restore the default or previously saved settings.
Click Apply to save your changes.
EX3510-B1 User's Guide
124