Table of Contents
Advertisement
TROUBLESHOOTING
General
Symptom
Cause
Remedy
There is no power.
e
AC cord is unplugged.
@
Plug power cord into wail socket.
No sound from speakers.
| e
Volume is turned all the way down.
e@
Raise volume setting.
®
Speaker cords are disconnected.
e@ Connect speaker cords correctly.
e
Speaker cords are connected with vinyl | ©
Strip viny! insulation from speaker wire tips
insulation still on.
before connecting.
e
Functionisnotsettothedesiredlistening
|e Select correct function.
source.
Sound
from
only
one|@
Oneofthespeakercords isdisconnected
| e
Connect correctly or replace with new cord,
speaker.
or damaged.
Strange sounds heard (or| @ TVis on.
e Turn off TV.
recorded from) tape, CD or| @
The unit is too close to TV.
e@ Move TV away until interference stops.
radio,
Tuner
No AM reception.
@
Loop antenna not connected.
e
Connect loop antenna correctly.
"|
e Wrong radio band.
e
Set to desired radio band.
@
Station not tuned in.
@ Tune in station.
5
Beat noise heard.
e@ TVison.
@
Turn off TV or move TV away.
@
Loop antenna position bad.
@
Change loop antenna position.
——
Noise heard.
®
Interference fromnearbyfluorescentiight, | #
Stop using device causing interference.
hair dryer, or other electrical appliance.
st
Sound is distorted.
@
Antenna in poor position.
e
Change antenna position.
e
Broadcast is weak.
@
Use external antenna.
e
Interference from other electrical devices | e Change antenna position.
or multipath reception.
There is no stereo sound. | @
Broadcast signal is weak, antenna input is | e
Change toa multielement external antenna.
insufficient.
@ The AM-NR/EM-MONO button is turned | e
Press AM-NA/FM-MONO
so that the NR/
on.
MONDO indicator goes out.
Clock and Timer
No time indication.
@
There was @ power outage.
@
Set time again.
@
AC plug wes pulled out.
@
Set time again.
Timer does not work.
e
Current time is not set.
e@ Set current time.
@
Start and/or stop time is not set.
@
Set ON and OFF times.
e@ Timer is not on.
e@ Touse timer, press WAKE UP {-}or REC (+)so
that the timer display lights.
@
ONtime and OFF time are setatthe same
|e Set ON and OFF times having and interval of
time.
1 minute or more.
102
<ARE1226>
En
Advertisement
Table of Contents
