Table of Contents
Advertisement
4. Press the stoppers with your fingers to unlock them to release the rack, then push
the rack into the console.
5. Fasten two hex. bolts (M6, removed at step 2 in section 3.2.) to fix the rack to the
console.
6. Fasten the cables from the processor unit with four clamps at the front of the rack.
(behind
(behind
the chassis)
the chassis)
7. Use the clamp (see step 1 in section 3.2) to refasten the power cable.
Note: Confirm that the dummy plate covers the power switch.
8. Fix the front cover to the console with two screws.
Location of four clamps
Keep the
dummy
plate in this
position.
3. ECN-303/304 (OPTION)
3-7
Advertisement
Table of Contents
