Table of Contents
Advertisement
2. WIRING
5. Bind the cables to the fixing metal in the processor unit with the cable ties (sup-
plied).
6. For TTYCSLA series cables, pass the drain wire into the shrink tube (local sup-
ply), then fasten crimp-on lugs at the end of drain wires to screws shown above.
2-8
Fixing metal
Screws for drain wires
of TTYCSLA cables
(Pass the drain wires through
the shrink tubes (local supply),
then attach these crimp-on lugs
to the drain wire.)
Example of wiring (inside the processor unit)
Advertisement
Table of Contents
