Furuno FMD-3005 Installation Manual page 25

IPX2 kit
The optional IPX2 kit (Type: OP24-23, Code No.: 001-171-780) protects the connec-
tors shown below to waterproofing standard IPX2.
Name
Binding Screw
Connector Gasket 1
Connector Gasket 2
Rainproof Cover
Gasket Clamping Plate
1. Set the connector gasket to the unused connector not used.
2. Fasten two binding screws to fix the connector gasket.
Gasket clamping plate
3. Peel the paper from the double-sided tape on the rainproof cover, then attach the
cover to the position shown below by using four screws preattached to the proces-
sor unit.
Screws to fix the rainproof cover
Contents of IPX2 kit
Type
#4-40UNCX3/16 000-176-619-10
24-014-0107 100-367-730-10
24-014-0108 100-367-741-10
24-014-0109 100-372-202-10
24-014-0114 100-372-210-10
24-014-0115 100-372-220-10
Code No. Qty
10
2
3
1
2
3
Connector gasket
Rainproof cover
2. WIRING
Remarks
For D-sub connectors
For DVI connectors
For D-sub connectors
For DVI connectors
Processor unit
2-5