Furuno FMD-3005 Installation Manual page 42

2. WIRING
2.3.2 MC-3010A/3020D/3030D
• MC-3010A: Inputs analog signal. To set MC-3010A to the current input, connect
short pins to each terminals.
• MC-3020D: Inputs digital signal (8ch contact input). Contact or voltage input is se-
lectable (contact input requires short pins).
• MC-3030D: Outputs digital signal (8ch, normal open/close).
Fabrications
MC1.5-W-L600/1000/2000/3000 cable
(Input)
Vinyl tape Vinyl tape Vinyl tape
(width: 10) (width: 10) (width: 10)
MC1.5-W-L600/1000/2000/3000 cable
(Output)
Vinyl tape Vinyl tape Vinyl tape
(width: 10) (width: 10) (width: 10)
MPYC-12 cable (MC-3030D)
No use: 50 No use: 50 No use: 50
(Wind tape to insulate.) (Wind tape to insulate.) (Wind tape to insulate.)
2-22
120 120 120
30 30 30
Shield Shield Shield
(fold back) (fold back) (fold back)
Core: 6 Core: 6 Core: 6
100 100 100
30 30 30
Shield Shield Shield
(fold back) (fold back) (fold back)
Core: 6 Core: 6 Core: 6
125 125 125
80 or 80 or 80 or
more more more
85 85 85
Core: 6 Core: 6 Core: 6
TTYCSLA-1 (MC-3010A)
80 80 80
Vinyl tape Vinyl tape Vinyl tape
(width: 10) (width: 10) (width: 10)
Pass drain wire through Pass drain wire through Pass drain wire through
shrink tube (local supply), shrink tube (local supply), shrink tube (local supply),
then attach crimp-on lug then attach crimp-on lug then attach crimp-on lug
(pre-attached in unit). (pre-attached in unit). (pre-attached in unit).
TTYCS-1 (MC-3010A)
80 or 80 or 80 or
more more more 30 30 30
Shield Shield Shield
(fold back) (fold back) (fold back)
Vinyl tape Vinyl tape Vinyl tape
(width: 10) (width: 10) (width: 10)
MPYC-12 cable (MC-3020D)
80 or 80 or 80 or
more more more
No use: 50 No use: 50 No use: 50
(Wind tape to insulate.) (Wind tape to insulate.) (Wind tape to insulate.)
60 60 60
Core: 6 Core: 6 Core: 6
60 60 60
Core: 6 Core: 6 Core: 6
60 60 60
135 135 135
95 95 95
Core: 6 Core: 6 Core: 6