Furuno FMD-3005 Installation Manual page 65

3. Release all cables other than the power cable from their cable clamps.
There are six cable clamps on the rack as shown below.
4. Press the stoppers with your fingers to unlock them to release the rack, then pull
out the rack slowly.
Note 1: When dismounting the processor unit from the console, be careful not to
apply tension on the cables.
Note 2: The processor unit weighs 20 kg. Hold the rack securely so that it will not
drop to the deck.
Pull out the rack while pressing
the stoppers with your fingers.
3. ECN-303/304 (OPTION)
3-3