Table of Contents
Advertisement
Installation manual
16
4.5 Water connection (only for machines with heat pump)
All water intake connections to the machine should be fitted with manual shut-off valves and filters, to facilitate instal-
lation and servicing.
Water pipes and hoses should be flushed clean before installation.
The machine shall be connected with new water hoses. Re-used water hoses must not be used.
Hoses are to be of an approved type and grade and comply with IEC 61770.
After installation hoses must hang in gentle arcs.
All connectors present on the machine must be connected.
Connect the water to the water cooling system (6).
W00609A
Water pressure:
Note!
If the water pressure is below the minimum value, the drying result can not be guaranteed for certain
program.
4.6 Mechanical installation
If the machine is mounted on a base it needs to be fastened to the base.
fig.6321
Advertisement
Table of Contents
