Installation manual
15
6 Reversing the door
Note!
The left and right upper hinges are not interchangeable. When rehanging, a new upper hinge must be or-
dered from the supplier.
Disconnect the power to the appliance.
Carefully lay the drying cabinet on its back.
Remove the cover on the upper part of the drying cabinet (A) and the protection plate (B) above the control cable
from the door's membrane panel (C). Arrows in the figure indicate the location of the fastening screws for each part.
Disconnect the door cable from the control unit in the upper part of the cabinet using the fast coupling (D). Note how
the cables are connected!
Unscrew the lower hinge pin (E).
C
D
B
A
E
fig.W01255