Precautions - Sony NWS-1510 Service Manual

Precautions
Safety
• The unit operates on 220-240V AC, 50 Hz.
• Should any solid object or liquid fall into the cabinet, keyboard or
mouse, unplug the unit and have it checked by qualified personnel
before operating any further.
• Unplug the unit from the wall outlet if it is not to be used for an extended
period of time.
• To
disconnect the cord, pull it out by the plug. Never pull the cord itself.
• Do not share the AC outlet with any other power-consuming equipment
such as copying machines or shredders.
• Connect all power cables of the unit and its peripheral equipment to the
same AC supply line. AC derived from different supply lines may result
in voltage differences which can cause unwanted weak currents at the
time of connection or unstable operati-on.
lnstall-=-at-=-io~n
_________________________ _
Cleaning
• The NET WORK STATION, keyboard and mouse consist of high-
precision electronic parts. Do not drop or bump them against other
objects. Do not place them in locations subject to vibration or on an
unstable base.
• Do not install the unit near heat sources such as radiators or air ducts,
or in a place subject to direct sunlight, excessive dust and/or moisture.
• Do not place electronic equipment near the computer. The computer's
electromagnetic field may cause them to malfunction.
• The computer uses high frequency radio signals and may cause
interference to radio or TV reception. Should this occur, relocate the
computer a suitable distance away from the set.
• Provide adequate air circulation to prevent internal heat build-up. Do
not place the unit on loose surfaces (rugs, blankets) or near materials
(c4rtains, draperies) that may block its ventilation slots.
• Use only specified peripheral equipment or interface cables; otherwise,
problems may result.
• When moving the unit, insert the supplied yellow protection sheet to the
floppydisk drive.
• Do not place anything on the opened front cover. The front cover
cannot sustain extra loads.
• Clean the cabinet with a soft, dry cloth, or a soft cloth lightly moistened
with a mild detergent solution. Do not use any type of solvent, such as
alcohol or benzine, as this may damage the finish.
Notes.
ori Moisture.
Condensation
' ' )
NWS-1510/1530/1580
If the unit is brought directly from a cold to a warm location, moisture may
condense inside the unit. In this case, allow more than one hour before
turning on the unit.
Remove the floppydisk immediately when there is any sign of moisture
condensation.
1-5