(The screen is redrawn.)
MOUSE CHECK:
Move mouse cursor
(for Exit, Push any mouse button)
-----------------------------------+-----------------------------------
Move mouse or push any mouse button to interrupt
Interrupt check .................... OK
diag>
4 - 3 - 15 •
Led Lamps Command
This command test lights tne two LEDs on the main board.
The operator must confirm visually whether they light properly.
First tne green LED is tested.
It lights when the
<RETURN> Key is pressed.
Next, the yellow LED is tested in
tne same way.
diag> led -v
LED LA.MPS CHECK:
GREEN LED LAMP ON :hit <RETURN> key
YELLOW LED LAMP ON :hit <RETURN> key
Hit <RETURN> key to HEIT
diag>
NWS-1510/1530/1580
4-25